What Size Nut Fits A 3/16 Bolt?

What size socket fits an m8 bolt?

Size ChartBolt sizeSizeTolerance3/16″BSW11.5412mm12.305/16″UNF1/2″13.00M813mm13.3037 more rows.

What size bolt uses 1/2 wrench?

Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex BoltBolt Diameter (in)Head and Wrench Size (in)Hex Bolt Lag Bolt Square BoltHeavy Hex Bolt3/89/167/165/81/23/47/815 more rows

What size nut fits a 3/16 bolt?

US Nut Size TableSizeDiameter*HeightHex NutJam Nut5/16″1/2″3/16″3/8″9/16″7/32″7/16″11/16″1/4″17 more rows

What is the next size down from 7 16?

The next size after 00g is 7/16″. The sizes go up by 1 sixteenth of an inch from there, but they’re reduced fractions, so instead of 8/16″, we just say 1/2″. (And you probably thought in school you’d never have any use for learning fractions!)

What size bolt takes a 15mm wrench?

The standard wrenches needed are: 11,13,15,17,19,22,24,27,30,32,36mm. I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads. Your list of wrenches may be true for whatever you work on, but the reality is that you need most sizes.

What’s the next size smaller than a 9/16 wrench?

Wrench Size Chart for BoltsBolt DiameterWrench Size (Standard)Wrench Size (Metric)7/16″5/8″16mm1/2″3/4″19mm9/16″13/16″21mm5/8″15/16″24mm20 more rows•May 29, 2020

What size is a m6 nut?

Standard Metric Hex Nuts per ANSI/ASME B18. 2.4. 1M and B18. 2.4. 2MNominal Nut Dia. x Thread PitchWidth Across Flats, SThickness MMaxMaxM5 × 0.88.005.10M6 × 110.005.70M8 × 1.2513.007.5032 more rows

Is 3/8 and 10mm the same?

It’s the same size. 3/8 is in inch and and its 10mm.

How do I know what size nut to buy?

Place the end of a measuring tape on one of the flat sides of the nut’s outer perimeter. Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement.

What size is a m3 nut?

METRIC NUT SIZESSizeDINDIN934M2.65.002.00M35.502.40M3.56.002.80M47.003.2051 more rows

What size bolt does a 1/2 nut fit?

US Bolt Head/Wrench SizeBolt DiameterHead and Wrench SizeHex Bolt – Lag Bolt – Square BoltHeavy Hex Bolt1/2″3/4″7/8″9/16″13/16″-5/8″15/16″1-1/16″13 more rows

What is the most common bolt size?

Re: Most common metric bolt sizes The Asian manufacturers used the 12mm and 10mm as the most common, followed by the 15, 17 and 19mm.

What size nut fits a 5/16 bolt?

US Nut Size TableSizeDiameter*HeightHex NutHex Nut5/16″1/2″17/64″3/8″9/16″21/64″7/16″11/16″3/8″17 more rows

What size nut does a 9/16 wrench fit?

US Bolt Head/Wrench SizeBolt DiameterHead and Wrench SizeHex Bolt – Lag Bolt – Square BoltHeavy Hex Bolt3/8″9/16″-7/16″5/8″-1/2″3/4″7/8″13 more rows

What size socket fits a 3/8 nut?

US Bolt Head/Wrench SizeBolt DiameterHead and Wrench SizeHex Bolt – Lag Bolt – Square BoltHeavy Hex Bolt3/8″9/16″-7/16″5/8″-1/2″3/4″7/8″13 more rows

What size nut fits a 19mm socket?

Size ChartBolt sizeSizeTolerance18mm18.403/8″BSW18.43M1219mm19.461/2″UNF3/4″19.5137 more rows

What are standard bolt sizes?

Typically, machine bolt sizes range from 1/4″ to 1 1/4″ for square heads and 3/8″ to 1 3/4″ in diameter for hex heads, and lengths span from about 3/4″ to 18″ for square and 6 1/2″ to 24″ for hex heads. Measure length from under the head to the threaded end of the bolt.

What size is a m8 nut?

The standard size M8 hex nut is 13 mm across opposite faces, the vast majority you will encounter will be this size although you do occasionally see other sizes especially in mass produced products, Ford seem to have a thing about using non-standard sizes and of course not all nuts are hex nuts.

What size spanner do I need for a m8 nut?

Metric Spanner SizesNominal SizeSpanner SizeM610mmM711mmM813mmM1017mm14 more rows

What size bolt does a 7/16 nut fit?

US Bolt Head/Wrench SizeBolt DiameterHead and Wrench SizeHex Bolt – Lag Bolt – Square BoltHeavy Hex Bolt7/16″5/8″-1/2″3/4″7/8″9/16″13/16″-13 more rows

How do I know what size nut I need for a bolt?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.